There are so many ways in having your shirts printed with designs or illustrations on them. But then again, you would want to do it on your own since having it from shops doing it for you might be fast and easy but can come at a price. If you are a person who likes to make your own craft, then this could be very useful for you.
There are a few things you need to get before doing this. A lot of custom screen printing services in Fort Worth TX have certain materials also that they use to generate shirt designs that their customers want from them. Although you can do the same in a small scale if you want to try it out.
The basic process for this silk screen printing is that a photo emulsion is spread on the screens and then with the cutting out of the design, it uses the print outs from a clear paper. This way the design is sort of imprinted on the photo emulsion and makes the holes of the screens. This is where the paint can be spread over it to print on the shirt.
The materials that you would need for this procedure includes a screen frame or you can also use an old frame that can tightly hold the screens. Next is you need a photo emulsion with sensitizer, and then a bulb which is two hundred fifty watts which can be bought for four dollars, and latex gloves. The room you use should be pitch black.
Other stuff you should have is a squeegee and then a shirt or clothing that you want to be printed with. You should also get a garbage bag or any plastic to spill proof your workstation or desk. What this does is that you have all the freedom to do the designs and whatever you want with the customizations.
Prepare first the screens and the frame, make sure that it is tightly placed, too. The emulsion should be mixed with the sensitizer and then poured over the screens and evenly spread with a squeegee. Make sure that the size or area that is covered would be enough for the design and to also leave extra room as well.
When that is done, you can then place the screen in a dark room. Make sure there is no leak in light and that it stays there for two hours or until it dries completely. Go inside the room after that without turning on the lights and place over the printed design from the transparent sheet. This is what does the cutting process. Use a masking tape so it is easier to take out later.
Turn on the lamp and let it be exposed to the light for fifteen minutes. See if it already looks good after peeking through the faint cut outs, if not, let it stay for a bit longer. Overexposure can let the image bleed that is why you need to be careful.
Clean the screens off with running water until the dried emulsion on the design or the cut out parts are completely gone. Let it dry and lay it over the shirt with the cardboard inside it. Apply the ink over it and spread it using a squeegee over different directions, making sure it is evenly spread. Carefully take it out and let it dry.
There are a few things you need to get before doing this. A lot of custom screen printing services in Fort Worth TX have certain materials also that they use to generate shirt designs that their customers want from them. Although you can do the same in a small scale if you want to try it out.
The basic process for this silk screen printing is that a photo emulsion is spread on the screens and then with the cutting out of the design, it uses the print outs from a clear paper. This way the design is sort of imprinted on the photo emulsion and makes the holes of the screens. This is where the paint can be spread over it to print on the shirt.
The materials that you would need for this procedure includes a screen frame or you can also use an old frame that can tightly hold the screens. Next is you need a photo emulsion with sensitizer, and then a bulb which is two hundred fifty watts which can be bought for four dollars, and latex gloves. The room you use should be pitch black.
Other stuff you should have is a squeegee and then a shirt or clothing that you want to be printed with. You should also get a garbage bag or any plastic to spill proof your workstation or desk. What this does is that you have all the freedom to do the designs and whatever you want with the customizations.
Prepare first the screens and the frame, make sure that it is tightly placed, too. The emulsion should be mixed with the sensitizer and then poured over the screens and evenly spread with a squeegee. Make sure that the size or area that is covered would be enough for the design and to also leave extra room as well.
When that is done, you can then place the screen in a dark room. Make sure there is no leak in light and that it stays there for two hours or until it dries completely. Go inside the room after that without turning on the lights and place over the printed design from the transparent sheet. This is what does the cutting process. Use a masking tape so it is easier to take out later.
Turn on the lamp and let it be exposed to the light for fifteen minutes. See if it already looks good after peeking through the faint cut outs, if not, let it stay for a bit longer. Overexposure can let the image bleed that is why you need to be careful.
Clean the screens off with running water until the dried emulsion on the design or the cut out parts are completely gone. Let it dry and lay it over the shirt with the cardboard inside it. Apply the ink over it and spread it using a squeegee over different directions, making sure it is evenly spread. Carefully take it out and let it dry.
About the Author:
You can visit igniteimaging.com for more helpful information about Homemade Process From Custom Screen Printing Services.
Keine Kommentare:
Kommentar veröffentlichen