The convenience that asphalt or concrete pavements, walkways, and driveways is best known to homeowners that need them to access their houses. However, this convenience and any other benefit associated with these paved surfaces are threatened by the onset of winter. Many places in the United States experience snow when winter begins. Traditionally, people take their plows and head out to plow the snow away. When in need of heated driveway Denver should be visited.
Plowing away snow is a task that demands a lot of hard work which is both dangerous and physically demanding. Therefore, alternative methods of getting rid of snow have been invented and they are in use in various places. One of the best solutions to the problem is to install heated driveway systems.
These are snow-melting systems that use electricity to heat and melt snow so that driveways stay free of all forms of solid precipitation such as snow and ice. They are designed so that they can be used to target a given portion of the driveway only. This helps to save on electricity by heating only the portion that one needs to drive on to access their house.
Hydronic and electric coil heated driveway systems are two of the major categories of heated driveways. In electric coil systems, metal rods are installed underneath the pavement to melt snow that forms over it. The temperature at which the systems turn on or off can be pre-programed in advance.
These systems can also be programmed to go on or off at a particular time. When the system goes on automatically, it can also be programmed to stay on for a certain period. Six to fifty watts of power are produced by one linear foot of a single cable of electric coil. Temperature of at least 93.33 degrees Celsius can be generated by the system based on its model.
At that temperature, snow can be melted at the rate of a few inches per hour. Some systems are designed so that they are turned on automatically when there is any form of precipitation. The heat that the system produces keeps the air over the pavement adequately hot to prevent the formation of snow on the surface. Several inches of the air above the pavement will remain hot as long as the system is turned on.
Hydronic systems are composed of PVC tubing that zigzag underneath the pavement. The tubing contains a heated mixture of water and anti-freeze substance that circulates through it. Thus, the asphalt or concrete that makes the pavement stays considerably warm, which prevents the formation of snow. These systems cost more to install compared to electric coils, but they are cost effective in the long term.
Installation of heating pavement systems comes along with several advantages. The use of shovels and plows which normally cause scraping and chipping on pavements is eliminated. Maintenance of the systems once they are installed is also not necessary because they do not need to be maintained.
Plowing away snow is a task that demands a lot of hard work which is both dangerous and physically demanding. Therefore, alternative methods of getting rid of snow have been invented and they are in use in various places. One of the best solutions to the problem is to install heated driveway systems.
These are snow-melting systems that use electricity to heat and melt snow so that driveways stay free of all forms of solid precipitation such as snow and ice. They are designed so that they can be used to target a given portion of the driveway only. This helps to save on electricity by heating only the portion that one needs to drive on to access their house.
Hydronic and electric coil heated driveway systems are two of the major categories of heated driveways. In electric coil systems, metal rods are installed underneath the pavement to melt snow that forms over it. The temperature at which the systems turn on or off can be pre-programed in advance.
These systems can also be programmed to go on or off at a particular time. When the system goes on automatically, it can also be programmed to stay on for a certain period. Six to fifty watts of power are produced by one linear foot of a single cable of electric coil. Temperature of at least 93.33 degrees Celsius can be generated by the system based on its model.
At that temperature, snow can be melted at the rate of a few inches per hour. Some systems are designed so that they are turned on automatically when there is any form of precipitation. The heat that the system produces keeps the air over the pavement adequately hot to prevent the formation of snow on the surface. Several inches of the air above the pavement will remain hot as long as the system is turned on.
Hydronic systems are composed of PVC tubing that zigzag underneath the pavement. The tubing contains a heated mixture of water and anti-freeze substance that circulates through it. Thus, the asphalt or concrete that makes the pavement stays considerably warm, which prevents the formation of snow. These systems cost more to install compared to electric coils, but they are cost effective in the long term.
Installation of heating pavement systems comes along with several advantages. The use of shovels and plows which normally cause scraping and chipping on pavements is eliminated. Maintenance of the systems once they are installed is also not necessary because they do not need to be maintained.
About the Author:
When you are searching for information about a heated driveway Denver residents can come to our web pages today. More details are available at http://www.northstardesign-build.com/heated-pavements.html now.
Keine Kommentare:
Kommentar veröffentlichen