To Find Professionals In Seal Coating Greenville Is The Best Location To Check Out

By Kimberly Hill


After surfaces like walkways, driveways, and parking lots have been laid with asphalt, they must be protected from the elements. This is done in order to protect these paved surfaces from the effects associated with different weather factors like rain and snow. These weather factors are capable of damaging these paved surfaces a lot if not protected. Seal coating is one of the best ways of protecting these surfaces. When one needs Seal coating Greenville offers the perfect location to visit.

Naturally, paved surfaces have small cracks and voids along which damage starts to occur if not filled. For instance, snow can accumulate in the small voids and cracks, causing them to increase in size. This leads to more damage. To avoid this, a liquid product is applied over the surface in order to fill the voids. This way, in case it snows, the snow rests on top of the surface because they are no voids and cracks to accumulate inside.

When paved surfaces covered with asphalt are not sealed, it exposes the asphalt to the danger of reacting with weather elements, leading to oxidation. This in turn leads to the asphalt hardening and becoming brittle, which leads to cracks. The process of sealing needs to be conducted periodically. It is a common practice for most property owners to do it in October and September.

Over the course of time, several materials have been invented for use to seal pavements. The working of the various materials is the same even if they are different. The first step is to clean and patch the surface. The sealer is applied after patching has been completed. The sealer dries to create a surface that cannot be penetrated easily. The sealer used in coating is bought in liquid form.

Materials used to seal surfaces can be placed into two major groups, that is coal tar sealer and asphalt emulsion coatings. Coal tar sealer is a much cheaper option even though it requires a higher level of product management during the application process. This sealer is applied by professional crews because of its nature. If one is concerned about chemical and fuel spills on the surface, coal tar sealer is the option to go for.

Several benefits come with using asphalt emulsion sealers than when using coal tar sealers. The first advantage of these coatings is that they can be applied easily. Asphalt emulsion coatings also emit lower amounts of volatile organic compounds in the air. On the contrary, the level of resistance to chemical spills is lower in asphalt emulsion sealers than in coal tar sealers. Different manufacturers produce both of these sealers. As such, the quality of the products depends on the manufacturer.

One can know if a sealer is of high quality based on the level of solids it contains. One should check the recommendations that the manufacturer of the product offers before buying. One should consider recommendations of the manufacturer because not all sealers are designed to be suitable on all surfaces. How the product is applied also varies from one sealer to another.

How often the sealer should be applied on the surface will depend on many factors, including traffic and weather. If there is a lot of traffic on the paved surface, it is recommendable to reapply the sealer every year. Otherwise, one should apply after every two to three years.




About the Author:



Keine Kommentare:

Kommentar veröffentlichen